2x QP2-4.7/12/15/22/33 Ω Refrigerator PTC Start Relay Disk For Midea

Universal QP2-4.7/12/15/22/33 Fridge Refrigerator Compressor Motor Start Relay PTC Chip  4.7/12/15/22/33 Ω Ohm Starter 1 or 3Pins For Vissani Danby MAGIC CHEF KENMORE - 20 mm

Chip Disk's Diameter: About 20 mm,    Thickness: Abput 2 mm

 

Important Note:

This PTC chip is easy been broken, so be careful when disassembling and installing it, and don't too much force.

At the same time, the contact inserts of the old starter should be polished to remove the ablated stains to avoid poor contact.

  You Can Also Take Apart The PTC Stater To Use The Good PTC Chip With Your Old Stater'S Housing.

----- If your compressor is not starting,But burning hot and "click-clack" about Every 3-5 Minutes When Powered On.

It could be the start relay that is causing the issue.

It is a simple process to replace. Let me know if you have any questions.

Usually The QP2-15 Starter is about 14-16 Ω,When you tested it,if it's Not Good it will be more than 50Ω Or More.

This fits many brands including Magic chef, Samsung, Kenmore, Maytag, Haier, Danby and many others.

 

Allows a simple repair to a common problem with many wine fridges, mini fridges, and beverage coolers.

 

PTC Chip Dimensions:  Diameter 20 mm x 2 mm;

About 5 g.

 

Please confirm from the specifications in the listing that if this item will be compatible with your device before you placing order.

If you have any inquiries or questions please don't hesitate to contact us before purchasing,Thank you!

We Also Have the PTC Starter: QP2-33, QP2-22, QP2-15,QP2-12,QP2-4.7,MZ93...

    Package Included:

  2x/Lot Universal QP2- Series Start Relay Chip_ As You Chose ---- (Random Type/Logo Will Be Sent Out As Default)   --- Only the PTC Chip,The Starter Housing in Pictures is not included,just for your Reference!     Important Note: This PTC chip is easy been broken, so be careful when disassembling and installing it, and don't  too much force.    At the same time, the contact inserts of the old starter should be polished to remove the ablated stains to avoid poor contact.